Celltec load cell DNP5 is a dual shear beam pin load cell. DNP5 has application in tension weighing and also has none-commercial use for example weight measurement.
The material of this load cell is alloy steel. Celltec DNP5 also has IP67 which makes it washable
Applications:
Variety of ceiling weighing for example elevators and lifters weighing.
Measuring pressure force or tension like input force testing device.
Hanging weighing like crane weighbridges and pendent scales.
| Capacity | 10t, 20t |
|---|---|
| Max. Number of Verification Intervals (N max) | 200 |
| Temperature Effect on Zero (%FS/10°C) | ≤ ± 0.1000 |
| Temperature Effect on Sensitivity (%FS/10°C) | ≤ ± 0.1000 |
| Combined Error (%FS) | ≤ ± 0.5000 |
| Creep (%FS) | ≤ ± 0.1000 |
| Output Sensitivity (mV/V) | 1.0 ± 0.02 |
| Input Resistance (Ω) | 750 ± 10 |
| Output Resistance (Ω) | 700 ± 7 |
| Insulation Resistance (MΩ) | ≥ 5000 |
| Zero Balance (%FS) | 1.0 |
| Temperature, Compensated (°C) | -10 ~ +40 |
| Temperature, Operating (°C) | -30 ~ +70 |
| Excitation, Recommended (V) | 5 ~ 15 |
| Safe Overload (%FS) | 150 |
| Ultimate Overload (%FS) | 200 |
| Standard Cable Length (m) | 8 |
